Больше информации по резюме будет доступно после регистрации

Зарегистрироваться
Was online yesterday at 18:44

Male, 52 years, born on 7 April 1971

Actively searching for a job

Uralsk, willing to relocate (Netherlands, Spain, France, Italy, Austria, Czech Republic, Romania, Japan, Norway, Nigeria, Russia, Egypt, China, South Africa, USA, Libya, Germany, Syria), not prepared for business trips

Superintendent; Mechanical / Piping / Construction Supervisor/ Engineer

Specializations:
  • Other

Employment: full time

Work schedule: full day, shift schedule

Work experience 25 years 3 months

May 2022May 2023
1 year 1 month
Novus Bolashak

Atyrau

Oil and Gas... Show more

System Completion SMP Punch List Engineer
Seach for documentation: SLD, P&ID, Layout, Equipment list, Detail drawings. Visit site to determin and clarify the Punch Lists, check an access and constraints. Request and site visit to explain scaffold, man lift requirements. Daily review of SCMT for changes, updates. Prepare and open work permits. Identify SIMOPS issues. Identify and action constraints to close punch lists. Request scaffold, man lift, RAT. Provide other support to Excecution Engineer where required.
September 2021April 2022
8 months
Expertise LLP / North Caspian Operating Company

Atyrau

Oil and Gas... Show more

Construction Mechanical and Piping Supervisor
Be Visible Safety Leader. HSSE is one of the values of NCOC. The Construction Engineer as all the rest of the company leadership is expected to live those values by being an active participant of all the Safety initiatives. Provide oversight of Contractor’s construction works and ensure Contractor execution is performed in compliance with Company project specifications, drawings, RoK regulations, safety and quality standard. Review contractor developed key discipline documents, including construction design, shop drawings, work packs and completion packages to ensure compliance with Company design and pertinent codes and specifications. Review, provide instruction and advise on discipline activities to improve productivity and quality of the execution works. Provide technical information in order to support the PTW (permit to work) process; collaborate with the Issuing Authority and Person Responsible for the Area in order to safely and efficiently advance the works. Monitor work progress and key milestones of the Contractor’s and Maintenance workforce activities in the field of electrical & instrumentation engineering to ensure that documentation, equipment, materials and labor resources are in place to enable pertinent project schedule milestones to be achieved. Ensure accurate and timely forecasting of activities. Liaise with Supervisors, other Discipline Engineers, Foremen, Quality Control and Specialist Engineers to provide an optimum interface between the various operational activities. Coordinate closely with other functional groups in the team to provide construction support for construction activities, and to ensure timely feedback to continuously improve efficiency and performance for all phases of the work. Ensure that all relevant final project documentation in the specific discipline area is handed over to Company in a timely and orderly fashion meeting, project and contractual requirements. Meet safety, environmental, and ethical standards in all phases of project execution. Supervise mechanical completion and pre-commissioning activities and collaborate with vendors, providing the necessary technical expertise, participate in walk downs and provide input and clarity to the punch lists. Participate in the hand over process to Operations, pro-actively expediting punch list closure by the Contractor / Maintenance. Stand-in and temporarily assume the roles and responsibilities of the Construction Supervisor on occasions as directed by Management (during rotational changes, holidays, sickness, etc of the Supervisor). Intervene and stop the job (Construction jobs or otherwise) if unsafe acts are being committed. Assist the Contractor in resolving technical problems at site by clearly defining the problem and formulating practicable solutions for approval and implementation through the Technical Query process.
June 2019June 2021
2 years 1 month
Kazakhstan Project Joint Venture, Worley Parsons.

Atyrau

Mechanical-Piping Supervisor
Ensure that all piping construction contractors’ supervision and manpower are instructed in and comply with all aspects of Health, Safety, Environment and Security policy, site regulations, permit to work procedures and instructions and Client requirements; Ensure that piping construction contractors working within the discipline adhere strictly to the latest Approved for Construction project drawings, Specifications, ITPs, Procedures and Site Instructions; Responsible fir the HES, and quality aspects of the works within assigned areas and for ensuring construction contractors complete their work in accordance with the project schedule; Review and monitor the availability of drawings, specifications and etc; In conjunction with the contractors’ supervision, planning engineers and the construction engineer, develop detailed daily and weekly work plans in accordance with the overall planning schedule;
August 2018May 2019
10 months
Tecnimont Russia

Kingisepp

Mechanical Supervisor-Piping
Direct management of Mechanical Subcontractor(s) for piping; Ensure that their performances are carefully monitored in terms of schedule, quality and cost, and PIS will coordinate all necessary recovery actions whenever detect deviation from schedule or specifications under the guidance of Mechanical Piping Superintendent; Participate in the elaboration of work schedule and to the collection of the progress of the works and analyse any deviations; Punch listing pipework systems prior to hydro tests; Ensures the implementation of all the HSE procedures and standards for the areas or activities (subcontractors) of responsibilities; Directly participates to the HSE activities at the site as defined for PIS position in the Site HSE plan and related procedures.
December 2017August 2018
9 months
KAZPACO LLP

Atyrau

Work Pack Engineer Mechanical & Piping
Create Work Packages is the process of actually carrying out the subdivision of project deliverables and the scope of work in line with the WBS, thus creating the Work Packages. Prepare method statement for mechanical and piping scope of work. Prepare job cards. Check project drawings and make red-line murk up drawings. Maintain an overview of current work pack status in the associated WMS systems and provide progress updates to the integrated planning engineer. Be aware of all project technical standards, procedures and specifications and ensure work packs are compliant. Liaise with the RO team leader / project engineer to agree schedule for issue of work pack deliverables.
March 2017November 2017
9 months
Sicim S.p.A. Kazakhstan

Atyrau

Construction Civil Pipeline Superintendent
Monitoring the routine processes at the construction site. Provide supervisory direction of craft workers via the general foreman and foreman, managing the performance of productivity, safety, quality and schedule adherence. Coordinating special inspections, daily progress inspections, and laboratory testing services. Liaison between field engineering and craft to ensure compliance of construction drawings and specifications. Assist in schedule planning, determing craft labor levels, material quantities, equipment requirement and etc. Controlling the utilization of stocked resource and level of stocks. Handling exceptional situations at the site and planning the respective processes accordinaly. Reporting to the site manager about critical situations. Performing other duties as may be required.
February 2016December 2016
11 months
North Caspian Operating Company N.V.

Atyrau

Mechanical & Piping Supervisor
Check of accuracy and timeliness of project data related on design, purchase and construction that meet standards and technical specifications; Monitor and report contractor progress to line manager; Provide technical support related on installation of piping and mechanical system; Provide and check material costs in material request and coordinate with vendor about delivering of material; Check, approve and issue all required project drawings, procedures and specifications and etc. to contractor; Provide engineering and technical support to specialists for planning of mechanical and piping works, erection of piping system, piping material and scope of works; Provide support for developing of Risk Assessment; Issuing of Punch Lists and made inspection of piping and mechanical system as per projects check lists; To ensure that, for piping and mechanical discipline, the quality assurance record books are properly documented and maintained by the contractor; Proposes alternate construction techniques to improve work execution efficiency, safety, quality, and / or reliability
October 2014October 2015
1 year 1 month
Kazakhmys Project LLC

Pavlodar

Construction, Real Estate, Architecture... Show more

Mechanical & Piping Supervisor
Planning of construction works for mechanical and piping system. Implement and maintain Zero Harm environment. Perform and review risk assessment and risk evaluations. Evaluate suppliers, vendors and service providers. Assist with complying scope of work and schedules for tenders and contracts. Source discipline related construction materials, equipment, machinery, etc. required on site. Inspection, monitoring and ensuring that all piping and mechanical related construction (field) activities are in compliance with construction related to the Republic of Kazakhstan regulations and to all engineering, construction and QA/QC requirements. Enforce the Kazakhmys construction program for the Boshakol project. Monitor and record Contractor’s progress against project schedule and key milestones. Ensure that all Contractor are fully aware of the planned scope of activities on a daily, weekly and monthly schedule. Act on any non-conforming works or practice. Alert the Construction Superintendent of any delays or potential delays. Ensure that all materials, machinery and equipment conform to the specification and quality standards. Evaluate construction against drawings, and record and report any deviation and change to the agreed design. Analyze Contractor’s man-hours against budget and report all variations. Liaise with Quality management to ensure that the specifications and quality standards are being achieved and adhered to. Resolve engineering conflicts whilst on the project site. Work with construction and QA/QC personnel and contribute to a smooth and seamless handover to the operation and user. Awareness of all materials brought to approved lay down areas and monitor that storage is managed in line with material types and requirements for construction. Accurately record all works completing daily, weekly and monthly construction reports
March 2014October 2014
8 months
“Lloid Register Energy.”

Kazakhstan

Business Services... Show more

Mechanical Engineer
To perform assessments, provide specialist advice/solution and training to internal/external clients, undertake research or development work within agreed parameters including budget and contractual requirements. To produce the deliverable within the agreed parameters in a defined format including contract terms and conditions. To pursue Continuing Professional Development and maintain a high degree of discipline knowledge and awareness. To assess/recommend scope, cost, time, resources of the work to be undertaken for an internal/external client meeting contractual/project requirements. To discuss/present the deliverable with internal/external client and be able to suggest alternative solutions where appropriate. Undertake administration as required in line with the current processes and procedures To assist improvement in service delivery by communicating internal/external client feedback as appropriate. To give technical guidance to other employees, as appropriate and disseminate information to achieve effective knowledge transfer and application. To conduct activities in line with internal procedures, accreditation schemes, legislation and industry standards. To contribute to internal/external client management as appropriate by acting as point of contact to effectively manage client and LR relationships.
February 2013December 2013
11 months
“Tecnicas Reunidas S.A.”. Khabarovsk Refinery, Hydroprocessing Project

Russia

Construction, Real Estate, Architecture... Show more

Piping Supervisor
Supervising construction and ensuring that construction complies with detailed engineering, schedule and safety practices. Helps the management to identify any actual or future slippage or blocking points in work progress To ensure that the quality of the piping prefabrication work performed on site by the contractors in compliance with contract requirements. To ensure that the quality of the piping erection work performed on site by contractor and sub contractor complies with contract requirements. To ensure that, for piping discipline, the quality assurance record books are properly documented and maintained by the contractor To check the progress of the work performed by the contractor To participate in technical reviews To ensure that all risks are well anticipated and reduced as much as possible by the contractor. Control of the contractor during construction activities To report on the work performed by the contractor and on any problems encountered to the Piping Superintendent
July 2011August 2012
1 year 2 months
. “KMG Kashagan B.V. Secondee to Agip KCO”. Offshore Department.

Kazakhstan

Offshore Mechanical & Piping Supervisor
Monitoring and supervising the piping fabrication activities carried out by the Contractor at fabrication yard in Aktau Monitor the quality and progress of the work scope and adherence to company and contractor procedures; Ensuring that the piping fabrication and assembly activities are carried out to the schedule and highest HSE standards; Ensuring necessary HSE reviews are undertaken and identified actions completed; Ensure the Company quality standards and applicable code are applied; Coordinate, support and interface with IVB during piping prefabrication and NDT activities; Providing daily progress reports to Pig Trap Project Coordinator; Participating in engineering and fabrication and safety meeting in Kazakhstan or Italy for piping fabrication and assembly works; Providing technical support to the project on piping fabrication, installation, mechanical completion, commissioning and Hook up; Provide input to Project Documents for Piping fabrication / assembly, commissioning and start-up requirements; Supporting for load out/in activity; Contributing to EP Offshore improvement process and close-out report; Ensuring the issuance of appropriate documentation for installation works e.g. requests, permits, isolations, etc; Coordinating closely with all interfaces associated with the project; Provide input: operability issue associated with piping layouts, in particular low points, venting, testing, etc; Work closely with company O&M group.
March 2010June 2011
1 year 4 months
“KMG Kashagan B.V. Secondee to Agip KCO”. Phase II Kashagan

Italy

Oil and Gas... Show more

Facilities Project Mechanical Engineer.
Ensuring that adequate technical definition and cost estimate are provided for the evaluation of the proposed concepts; Ensuring that proposed Kashagan development concepts are robust in term of constructability onshore installation; Building and Maintaining a database of construction capabilities and skills available in the Caspian region and Kazakhstan; Ensuring that all opportunities and risks related to construction are properly evaluated and managed; Maintaining interface and communication with Experimental Program Project to monitor the evolution of construction activities and ensuring that lessons learned from Experimental Program are capitalized; Addressing the impact of SIMOPS (simultaneous drilling, production and construction operations) and HSE issues on construction activities and programs; Execution and completion of construction and project implementation studies in accordance with the approved Development Program and Budget; Participate in preparation of construction contracts; Preparation of construction sequence and construction strategy; Preparation of advance construction schedule as per construction sequence; Complying with Project Procedures and Policies for the execution of the studies and projects; Assisting the FFD development Manager in the preparation of Kashagan Full Field Development contract strategy; Managing the day to day progress of the studies and projects operations ensuring that budget and allocated resources are utilized in the most efficient and effective; Projects: “Kashagan Development Project. Phase II”
May 2009March 2010
11 months
"Aker Solutions Contructing AS" Kashagan Hook-Up Project

Kazakhstan

Construction, Real Estate, Architecture... Show more

Costruction Supervisor
Lead the foreman and work force in daily work related to SOW Look ahead and plan for new jobs. Make sure that we have the correct competency and give input to manpower request weekly pending on plans and development of the project Take actions whenever there are persons violating rules and procedures Give input to develop the site: Equipment, personnel and organization Responsible for the time sheets for the work force Develop personnel by sharing information Responsible for the house keeping in his/hers dedicated area Responsible to make sure that the construction work are performed after specifications and instructions Responsible to perform and maintain WRAP, TRIC and PTW Coordinate against other areas Keep the working time Participate in meeting as required in project Responsible to update documentation and updating progress in MIPS Must in periods perform other duties instructed by superior Projects: "Gas Separation and Dehydration Systems"
April 2009August 2009
5 months
“Tengizchevroil Plc”. TCO Infrastructure and Facities Management Project Group.

Kazakhstan

Oil and Gas... Show more

Facilities Project Mechanical Engineer.
Develops of discipline engineering sketches, drawings and specifications. Coordinates and reviews off – site discipline engineering work performed by engineering service contractors. Specifies and assists site survey work. Production of discipline engineering of new (and modifications to existing) Camp Facilities compounds built to support Oil & Gas and Petrochemical Industry, and production of “Approved for Construction” work packages. Specifies and orders documentation for purchasing materials and equipments. Coordinates activities with vendors / suppliers. Provides technical engineering supports for the discipline: piping pressure drop determination; piping stress analyses; NPSHA & NPSHR determination for pumps, size determination for pressure vessels and ect. Develops schedules and estimates for the discipline. Provides Field Mechanical / Piping Engineering assessment and / or inspection. Provides technical information for different types of materials used in construction with the Camp Facilities supporting the oil & gas industry. Projects: "DB FW Pump House Protection System Upgrade"; "Deflectors Installation on IB Boiler House"; "Water Softener Installation on Central Heat Supply Station"; "DB UG Gasline Casing Installation on Road Crossing"; "TCOV UG Gasline Casing nstallation on Road Crossings"; "TCOV E-5 HVAC System Modification".
March 2007November 2008
1 year 9 months
"Samek International LLP"-Group of Max Petroleum Companies. Engineering and Facilities Department

Kazakhstan

Oil and Gas... Show more

Construction Supervisor
Conducts technical supervision for work at the stage of construction. Arranges and provides coordination between subdivisions’ and service group specialists on issues of design, construction and operation of facilities (from designing to construction facilities commissioning and acceptance). Provides technical support for the discipline: piping pressure drop determination; piping stress analyses, piping routing, mechanical system calculation. Controls quantity of Contractor equipment and personnel assigned to reimbursable jobs to maximize work execution efficiency and minimize overall cost. Conduct Pre-Construction and Progress Meetings for Projects. Plans and recommends solutions for common repair, maintenance and replacement project in the field with Production subdivisions. Proposes alternate construction techniques to improve work execution efficiency, safety, quality, and / or reliability. Develops conjunctly with contractor and design organizations projects of start-up complexes of completed objects. Acceptance of delivered materials as per invoice. Track for observance of both western and RoK standards during construction. Projects: “Upgrade & Expansion at the Temporarily Production Facilities-Phase II; III”; “Installation of Transport Oil Pipeline”; “Construction of RVS 1000m³”; “Construction of RVS 2000m³”; “Construction of Tank Farm RVS 1000m³”; “Installation of Gathering Oil Collector and Flow Lines of Wells”; “Building of automobile road”.
September 2005March 2007
1 year 7 months
"Karazhanbasmunai JSL"; Field Capital Construction Department

Kazakhstan

Oil and Gas... Show more

Field Facilities Engineer
Provides technical assistance for constriction of capital projects (deadlines, quality, etc.). Arranges and provides coordination between subdivisions and service group specialists on issues of design, construction and operation of facilities (from designing to construction facilities commissioning and acceptance) within authority granted by the Management of the Company. Plans and recommends solutions for common repair, maintenance and replacement project in the field with Production subdivisions. Seeks and collects data and other information required by the Design Institutes. Participates in development of as-built documentation and follows-up its approval. On behalf of the Client conducts technical supervision for work progress at the progress at the stage of construction; consults on issues within own competence. Track for observance of both western and RoK standards during construction. Drafts drawings for construction works. Provides technical calculations for discipline: piping pressure drop; piping stress analyses; HVAC System and etc; Prepares MR’ for materials required for facilities construction, including FG. Observes requirements of the RoK Ecology Legislation. Observes and controls observance of “Department environments plan” Projects: “Steam Plant-3”, “Tank 5000m³ №10 @ CPC”, “Tank 5000m³ № 6A @ CPC”, “12” Fiber Glass Line from GZU-32 to DNS - 2”, “New BKNS-3 @ CPC”, “GZU-32 Construction”, “Installation of 3 Sigma Pumps @ DNS-2”, “ Sales Tank 10000m³ №1 Repairing in KTO”, “Gas Utilization Program at GZU-30,31 & 32”, 12” FG Oil Line Construction From GZU-5PTV to CPC”, “Steam Plant-3 Expansion", “48 wells Water Injection Program at East”.
January 2004August 2005
1 year 8 months
“Tengizchevroil Plc”. Facilities Engineering Construction Group

Kazakhstan

Oil and Gas... Show more

Construction Representative
Proposes alternate construction techniques to improve work execution efficiency, safety, quality, and / or reliability. Proposes alternate materials if shortage of proposed material Conducts technical supervision for work at the stage of construction. Prepares minor Instruction to Contractors (ITC) with Field Sketches, if required. Negotiate minor ITC costs with Contractor, if required. Prepares Weekly Progress Reports. Conducts Pre-Construction Meetings for Projects. Conducts Job Safety Analysis Meetings for Projects Prepares Minutes of Pre-Construction & JSA Meetings. Gives Site Answers to Contractor’s minor Site Engineering Queries (SEQ). Become familiar with other disciplines. Interfaces with appropriate Project Engineer(s) on technical issues to ensure project objectives are met. Controls quantity of Contractor equipment and personnel assigned to reimbursable jobs to maximize work execution efficiency and minimize overall cost. Track for observance of both western and RoK standards during construction. Projects: “Train 2.3. Power Station Upgrade”. “Plant Canteen SIP / Maintenance Building ”, “KTL2.1 D302 Vessel”, “Replacement. Caustic Line Replacement”, “LPG Park Control Room Additional”, Turnaround: “KTL 2.1 C 402 Burner Enhancement”
February 2003December 2003
11 months
“Baker Overseas Technical Service”. Maxima Data Collection Group

Kazakhstan

Business Services... Show more

Mechanical Completion Engineer
Entering of process mechanical equipments and piping systems data into Mechanical Spreadsheet from as built documentations; Checking of Red line marked up as built documentations and turnover documentations.
November 2001October 2002
1 year
“Senimdi Kurylys” Joint Venture

Kazakhstan

Construction, Real Estate, Architecture... Show more

Test Pack Mechanical Engineer
Supervision for construction at the pre-fabrication, fabrication & construction stages; Insuring that process piping and mechanical systems are installed as per project documentations.
July 1994November 1999
5 years 5 months
“Kulsary Department for Oil Field Maintenance”.

Kazakhstan

Construction, Real Estate, Architecture... Show more

Mecjanical Fitter
Construction of pipeline systems, oil tank farms and oil trunk line pump stations; Maintenance of oil tank farms; Fabricate pipe spools.
December 1995March 1999
3 years 4 months
“Atyrau Oil Refinery “. Repair Adjusting Shop

Kazakhstan

Oil and Gas... Show more

Mechanical technician
Repairs technological columns, condensers, exchangers, oil heaters, pumps, process piping system; Fabrication of pipe spools.

Key skills

You can change skill levels in the mobile app — the website will have this feature a little later on

Обучаемость

About me

More than 24 years’ experience as Mechanical and Piping Specialist in the field of engineering, construction, mechanical completion and pre-commissioning activities for various construction projects in Oil and Gas sectors. Well experienced in engineering, fabrication, installation and pre-commissioning of piping, dynamic and static equipment;. Well experienced in dossiers like preparation of test packs, As built control sheets, revising of Isometrics and P & ID, preparation of engineering procedures and providing of technical calculations. Well experienced in supervision of mechanical and piping teams. Good competence in HSE Codes and Standards. Familiar with international standards like ASME, API, AWS, BS EN, ASTM, NFPA, GOST, VSN, SNiP and etc. HIGHLIGHTS Capable of supervising team to achieve goals. The ability to take responsibility for team performance, by setting clear goals, expectations, tracking progress against the goal, ensuring feedback and addressing performance problems and issues promptly. Ability to quickly establish relationships to ensure mechanical and piping engineering processes and standards are consistently applied. Demonstrable interpersonal & communication skills. Ability to influence others (Company and Contractors) and make the case for change using technical arguments. Ability to build consensus around issues with major impact on the Project including perspectives of external stakeholders regarding the company’s reputation. Fluent English language skills. Ability to write and review technical documentation in English. Solid computer skills. Computer Skills: MS Office: Word, Excel, Access, Power Point, Visio, Project; Internet; AutoCAD, MIPS, SAP, JD Edwards, Info Work, Prodom, Autodesk Navisworks Freedom, EDMB+, EDMS; SPR

Higher education

2001
Atyrau Institute of Oil and Gas
Machines and equipments of oil and gas fields, Diploma #1273. Mechanical Engineer

Languages

KazakhNative


EnglishC2 — Proficiency


RussianC2 — Proficiency


Professional development, courses

2019
Non Destructive Testing
TBRK Group, NDT Specialist
2015
"Basic Offshore Induction & Emergency Training"
Seftec, Certificate
2008
"Surface Production Facilities Operation"
NExT, Certificate
2005
"Maintanance and design of pressure vessels"
World Petroleum Training, Certificate
2004
"TCO Safety in Designs"
Tengizchevroil, Certificate

Citizenship, travel time to work

Citizenship: Kazakhstan

Permission to work: Kazakhstan

Desired travel time to work: Up to one hour